I Finally Got a Sequencer

As I previously mentioned before, I've been on the lookout for a sequencer, the Doepfer A-155 in particular since the Milton is vaporware for the most part. I actually lost an auction one two weeks ago on ebay, and had been waiting for another to show up.

Then, yesterday, I saw a post to the AH list (I'm just a lurker, not a member) from a guy who was looking to sell one, and he was in Santa Cruz! I went and got it on my lunch break, and pretty much started at it on and off for the rest of the day. I ended up being at work until pretty late so it was about 10pm before I actually got around to plugging it in.

Before hooking it up though, I thought I would give organizing the "portable" system a shot. It wasn't really working out...I couldn't fit all that I wanted into 1 A-100P case...not with the Sequencer. If it was like 12HP or so smaller, then *maybe*. So I'll be starting on a custom case ASAP. With the Sequencer installed, I'm down to 22HP free.

So anyway, everything I said about not wanting a sequencer was simply uneducated bullshit rationalization on my part. I LOVE the sequencer...I think want two now! Just having one row patched to a 2 OSC FM sound was fantastic fun. I played around with it for about 3 hours, trying different clock sources, messing with using one of the trigger rows patched into the sequencer Reset to play with the sequence length in realtime, etc, but I think I've only just broken the surface of using this in patches. The A-154 controller will no doubt be in my future as well, especially if I decide on picking up a second A-155.

I did leave a patch up that I did at the end of the night, I just didn't record it; I'll do that tonight and update the post here with the audio.

Computers Make Me Mad

A disclaimer: I love computers. My day job is testing software. I use computers 18 hours out of every day. They still make me mad.

Case in point, at work they've decided to do this company compilation and give a copy of it to everyone for christmas. Everyone (who wanted to) was supposed to submit at least 1 track. I of course didn't find out about it until the last minute and only had a weekend before the deadline for submission. And by "weekend" I mean Sunday afternoon.

I actually was able to compose the backbone of the track on the MachineDrum Saturday night while "watching" TV. I also had a couple of modular patches in mind, both utilizing one of the joysticks that I've gotten wired up to a pair of patch cables. So I was rather excited because that short window of time on Sunday would simply be for tracking and quick mixdown. Easy peasy japanesy.

So I sit down Sunday afternoon, tweak on the patches for an hour or so and then decide to get down to tracking. I wanted to get each of the 12 tracks/sounds of the machine drum recorded onto it's own stereo track (stereo tracks because the machinedrum sounds had stereo verb and panning and delay on them and I wanted to preserve that). This meant syncing to MIDI Clock...no big deal right? Well, after about 20 minutes of hooking all that shit up, finding the sync settings on the MD and setting the right stuff up in Logic+AudioMidiSetup I finally got it going. Hit play in Logic...MachineDrum starts playing. Sweet! :D

Add new stereo track-> Solo kick track on MachineDrum -> Record 4 bars -> Stop -> Playback -> WTF!?

The recorded audio was actually being printed earlier than it should off; effectively making each hit fall earlier than the beat in Logic. I know it should not do this so I spend the next 2 hours trying to figure out why it was doing it...I gave up out of frustration after that. No new track, and more stress on the weekend. Fuck.

I still have no idea where the problem lies. I'm keen to blame Logic as that is a favorite pastime, but I don't necessarily know if it is purely at fault. I imagine it's a combination of Logic settings, the midi interface connection (Elektron TM-1) over USB and some good ol' MIDI slop.

The thing that really sucks is I can't let it rest until I figure it out...I know I'll end up in there tonight cursing and yelling and kicking things. Heroes isn't on, I'll have nothing else to do but lock myself away in the nerd cave and get pissed off.

:p

I'm also pissed off in general that this kind of setup doesn't "just work". I know it could be the USB hub, or just midi slop or some other unavoidable thing like that, but IMO, that's unacceptable. If MIDI Clock is supported it should fucking work, rock solid...if it's sloppy, what the fuck is the point, don't even put it on there. Same thing for USB midi interfaces...if you can't make it work reliably connected to a hub with a keyboard, mouse and dongle, don't fucking bother! It's not like I have cheap shit either.... ok, I'm getting off on a rant. :/

Fingers crossed for a happy ending.

Decisions, Decisions

As I mentioned somewhere in the past, I want to build a larger case for my modular but keep one of my A-100P cases as a "portable" system. I'm having a really hard time deciding either a) What exactly would go in this "portable" system or b) just not have a "portable" system and only have one larger case, which wouldn't be that much more less-portable.

The B case is very tempting. The case size I'm thinking of is ~28-32" wide and ~15" tall so it's still pretty portable as far as cases go. It wouldn't necessarily fit in the overhead compartment of a plane like the A-100P, but the likelihood of me traveling by plane and taking a modular with me *anytime* in the near future is pretty small. Plus, when I would take the modular somewhere (friend's studios, AH meetups, etc) I would have everything with me...I wouldn't be saying "if only I had x from my main system with me". The final benefit is that selling both A-100P cases would net more cash than just selling one...which means more money for modules.

The A case is tempting because I like "portable" gear in that kind of form-factor. I've always though the Buchla Music Easel was one of the coolest things ever. I would really enjoy having something like that. The reality is, I don't take stuff from my studio that often, and when I do, it's usually for doing audio processing over at a friend's studio...and typically that means filters, ring mods, etc and not oscillators or other "synth" components. The other crux with the A case is that I can't decide what to actually put in the system since it is a small amount of space and the modules that I really would want to have all the time are fairly large. Examples.

1) Livewire AFG - 28HP
I know it's not out yet, but I know I will want this osc all the time.

2) Livewire Vulcan Modulator - 14HP
After using this so much, I don't think I could substitute a pair of normal LFOs and not miss it. Sub-ing 2 LFOs might actually take up even more space. Add an extra 8HP for the Selector Expansion module when it's released.

3) Livewire Dalek Modulator - 14HP
Not only does it provide the ring mod functionality, but it's my main source for audio rate modulation. I couldn't imagine using the AFG without this. Sub-ing 2 oscs, even without ring mod would take up even more space.

4) Plan B Model 10 Poly EG - 12HP
Again, here's a module I couldn't see not having all the time, I would miss it's functionality if I subed in a standard Doepfer EG, which would only gain me 4HP anyway.

5) Plan B Model 13 Dual Timbral Gate - 12HP This one I might be able to live without all the time, BUT, it could also double as the main VCA (so long as I have some overall output atten somewhere) so that could actually save space.

6) Livewire FrequenSteiner filter - 16HP
This I've thought about over and over. The multi-mode is a basic requirement, the HP sounds really good and I would miss that. Also, self-oscillation is a requirement, so that would put out the Plan B M12 as a possible replacement (which would only save 2HP anyway). It also has a sound that's not too gritty, but not to smooth...it's rather perfect in the "character" range as far as filters go. It also has two CV ins, each with attenuators. These latter two qualities put it a bit ahead of the Polivoks as a substitute, that and the HP mode, which I would miss.

7) Some kind of mixer/attenuator - 8HP minimum
The Plan B Model 9 would be perfect here as it's both a mixer and attenuator simultaneously. It is 14HP, however. At a minimum, I'd need my Doepfer A-138c, 8HP.

So that brings us to 104HP, which leaves 60HP free. Despite my earlier statements on sequencers I actually do think I want one now and having it in here would be great...or at least, I would imagine I would want it once I got used to having it. That scratches off 50HP right that at a minimum. The other side of having a sequencer is that when I did take this system over to my buddies place for processing/sound design, I know he's gonna want to sync it to MIDI so that would take us into negative space with the MIDI-CV and clock divider. Plus, I didn't even count utility modules like VCAs and mults.

I guess I could go without the sequencer, toss in the Dual Cyclotron (28HP) or the Chaos Computer (28HP) whenever that actually gets released. The Chaos Computer might actually make an ok "sequencer" of sorts. You wouldn't necessarily be able to directly program the sequence, but you could influence it.

The final problem is that while I might have 60HP free, it's not 60HP in a row...it might 10 on top and 50 on bottom or 22/38, or something else. This can also restrict which modules I can actually choose.

I'm starting to loose track of thought now... Having one single case seems to be the simplest, sanest, least complicated way to go...but I've still got a soft spot for that "Portable" system. :/

What do you guys think?

Polivoks Sawtooth Wave

So, I remembered I do have an oscilloscope...of sorts. I have Audiofile Engineering's Spectre, which does have an oscilloscope, but it's limited to what your audio interface can do, and unfortunately my 828mkII is not DC-coupled, so I can only use the software scope for audio rate stuff.

So anyway, that works perfectly for checking out what the waveform looks like when having the Harvestman Polivoks self-oscillate and have it's BP output FM itself.

I mentioned in the Polivoks review that it has a "saw-like sounding hybrid" when doing this...well I wasn't quite right...it IS a sawtooth!

It's a little quiet (amplitude-wise) than say, the Plan B Model 15, but it's a very cool and usable sawtooth wave. I had a lot of fun gating it with the Model 13 Dual Timbral Gate and even layering it with the Model 15, tuning it to harmonic intervals.

This is my first state-variable filter which has simultaneous LP/BP/etc outputs so I'm curious if other filters have a similar response when patched in such a fashion. Sound off in the comments if you know.

Ghost In The ICs

Before sitting down to wrap up another mastering project and start on yet another (when it rains, it pours) I decided to patch up something on the modular for a while, making a specific effort to use the Polivoks.

After messing around with that sound of the Polivoks self-oscillating with the BP out FM'ing itself that I mentioned in the review, I started a patch using it as a regular BP filter and came up with what I called "Ghost In the ICs".

This quite possibly could be my favorite sound I've come up with yet. I think it could have been even more expressive with the joysticks involved, but it's hard at this stage to play them without the alligator clips popping off or having a flaky connection. Here's what the patch consisted of:

The lower register of the sound (the slightly formant like one) is one square wave oscillator from the Dalek Modulator with a little bit of x-modulation. That is being fed into the Harvestman Polivoks which has it's resonance about 3/4 of the way up, getting a slight modulation of it's frequency by the Auxiliary out of the Dual Cuyclotron (both cyclotrons set to "discrete"; square waves), and the Bandpass output going into one half of the Plan B Dual Timbral Gate with the level up @ 10 o'clock. The gate level is opened by the accent out on the first 8th note of a triplet on the Plan B Model 28 Tap Clock.

The upper register of the sound (higher pitched sine wave-ish one) is the sine wave out of the other half of the Dalek Modulator, also with a little bit of x-modulation. That is going directly into the other half of the Plan B Dual Timbral Gate, with the level also @ 10 o'clock and the gate in "Filter" mode. The gate level is closed slightly (not being opened wider) by a Plan B Model 10 Poly Env, with the envelope going negative (~ 11 o'clock on the knob). The Poly Env is being triggered by the triplet gate output on the Model 28 Tap Clock, with the middle 8th note set to Rest.

The mix/sum output of the Dual Timbral Gate is going into the Frequensteiner with it's Resonance set to ~ 10 o'clock and set to LP mode. It's modulated slowly by the Triangle out of one half of the Vulcan Modulator as well as getting an Accent on the first eighth note (so accents on the quater note beat) from the Model 28.

Finally, the Frequensteiner is going into the main VCA (Doepfer A-131) which is being held open via the "clock divider always on trick" and also slightly modulated by the Triangle out of the other half of the Vulcan Modulator.

I added a little UAD RE-201 and UAD Plate 140 in Logic after recording it.



Enjoy.

Polivoks Filter Arrives

This is actually a couple days late, but I haven't had the time/energy to get around to writing up a post. Yes a video demo is planned, but technically the Plan B M15 is in line before it so for now, don't hold your breath. I also want to try and wrap up the joystick controller before moving on to more demo videos. If I don't finish a project within a week or so of starting it, I have a habit of abandoning it. So here is the initial [text] review:

It sounds awesome! It's not as dirty as I thought it would be based on the description at Analogue Haven. I was expecting something different by the "self-oscillates with a dirty pulse" line. It sounds very similar to my SSM A-105 Doepfer LP filter, but a little edgier. The bandpass output is also pretty edgy, especially at high resonances. Overloading the filter (by using both inputs and turning them up all the way) sounds really cool too; a little more mean sounding that the Frequensteiner can be.

The bipolar attenuator for the one frequency CV input is a really nice touch. I wish the second input had one as well; it has no attenuator.

I did some FM of the filter while it was self-oscillating (no input) and I was very pleased. The Frequensteiner tends to saturate a bit when doing the same thing but the Polivoks stays nice and biting. I will enjoy using this as an extra sine wave source; something that I find the frequensteiner doesn't do as well. When you are really FM'ing the heck of it, it sounds really gritty and dirty, almost like noise (as in white, not "hiss")...very cool. One of my favorite sounds I have discovered so far is to listen to the LP out while the Polivoks is self-oscillating (no audio input) and patch the BP output into the non-attenuated freq CV in. The result is this saw-like sounding hybrid. I wish I had a scope so I could see what it looks like, but it sounds very interesting.

The one downside I have experienced is a personal one. The knobs, while very smooth and easy to turn, are a bit "wobbly". If anyone has a Dual Cyclotron, it's similar to the 3 selector pots which have a slight wobble to them. I've begun to get used to it, but it was a bit disappointing at first. I've noticed that no complaints have come from anyone on the harvestman list or back to Analogue Haven about this on the Polivoks or the Malgorithm so I think I'm being a bit overly anal; something that is not a rare occurrence. ;) I'm sure once I have a few more Harvestman modules in my collection, it won't stand out as much. It of course has no impact on the sound, just my OCD.

All in all, it's an awesome filter and definitely needs to be in your collection, especially if you like having many different filter flavors.

Modulars = crack (aka the Sawtooth Animator post)

Ok, so I now fully understand the modular addiction. I knew before that it was one of those "black hole" hobbies that will always have some new thing to buy or entail some never ending quest to have "the ultimate" setup. That's all well and good...but when you start rationalizing dipping into savings or not buying certainly family members christmas presents, that's an addiction my friends.
http://www.blogger.com/img/gl.link.gif
I should know better too...I have an addictive personality. I don't gamble, cause I know that would get me into trouble...I quit smoking several years back, which is still difficult to fend off urges, and I'm very careful about not drinking outside of social/recreational means. I guess I always rationalized "gear" as not being an addiction.

Then again, maybe I'm being over dramatic. It's just that there are all of sudden more things that I want than I can afford...and I have money, but it's the "don't touch this except for emergencies and save until you are old" money. And of course, I'm trying to rationalize new modules that I want as "emergencies".

The Cyndustries Sawtooth Animator is the newest item to the WANT BAD list. This comes in right after the Livewire AFG...I have wet dreams of what the two sound like together. Previously, this was only available in the Cyndustries usual Modcan A format and I had seriously contemplated starting a small satellite system in that format simply so I could have the Sawtooth Animator. Well, now it's coming to Eurorack and Frac formats!!! Muff and Matrix have already got the jump on it. You must check out the audio demos here.

Aside from making me extremely excited, it also makes me a tad bit depressed that I'll either have to wait to have it, or be poor for a while. Back-alley sexual favors for modules is most definitely out of the question.

Joystick Proto - very early

So this weekend I finally dragged my ass down to Radio Shack and picked up a few necessary parts (protoboard, alligator clips, voltage regulator, etc) to start working on my little joystick controller.

Because I'm an idiot, it took me about 2 hours to do what should have taken about 5 minutes. I didn't fully understand the whole two hemispheres of the protoboard and this caused me to burn up 2 LEDs (2 *overpriced* LEDs I might add) as well as not get the voltage regulator working. Once I finally understood that, I succeeded in almost burning up one of the axis pots of the joystick. See, I didn't (don't, actually) understand the whole "shit's gotta be goin back to ground" principle and I have ~5V just sitting there in the joystick's pot. :P

Anyway, by the end of the sitting, I had a working prototype which is what you see in the picture above. And I did had a few hours of fun hooking it up with the modular and I'm really excited about getting it done. In addition to the one joystick pictured, they'll be a second joystick (without it's retention springs removed) and a handful of trigger/gate buttons. This weekend I hope to find a nice enclosure and start soldering stuff together. Of course, I'll document the rest of the process as much as I can.

Workspace and Environment

My interview for Trash_Audio's Workspace and Environment series is now up. Stoked!

http://trashaudio.blogspot.com/2007/11/workspace-and-environment-james-cigler.html

ZombieThunder

So I'm the processes of trying to narrow down what modules that I will keep in a single Doepfer A100P suitcase as a "portable" system; the rest will go into a custom case which I am about to start working on.

I started this decision processed basing the results purely on space, but pretty soon that became too difficult and I figured it would be best to just start taking notes on what modules I use most when making patches. One of the more interesting patches I happened on was this one, which I named, ZombieThunder. It sounded like thunder and something I would have heard in a zombie movie soundtrack.

Of course, I took notes on what modules I used, but I didn't on exactly how they were patched...I'm describing it from memory here....

Plan B Model 15 sine is main sound source
Dalek Modulator sine wave was FM'ing the Plan B Model 15
Dalek Modulator other sine wave was FM'ing the FrequenSteiner (LP mode)
Plan B Model 24 stepped voltage (smoothed through Livewire Dual Bissell) was controlling pitch of Model 15
Plan B Model 24 smooth voltage was controlling the 2nd sine wave freq on the Dalek (the one FM'ing the filter).
Livewire Vulcan Max out was also modulating the Filter (although much more slowly).
Plan B Model 10 in LFO mode was opening up the main VCA.



Enjoy.

Livewire Dalek Modulator Demo

This is a demo I have been looking forward too for a while. The Dalek is one of my fav modules because it is so useful, not only as a tone source, but as a modulation source; the latter I use the most frequently.

I tried to showcase it "on it's own" as much as possible since all the other video demos I have done so far have feature the Dalek in some shape or form. So without further ado...here's the Livewire Dalek Modulator.



Enjoy.

Trash Audio Studio Tour

After being sick last weekend and busy all week (and saturday with a mastering project) I finally got around to making a video tour for my upcoming Workspace and Environment interview on Trash_Audio. It was Surachai's idea to make a video and it came out better than I expected.

Rather than narrate this one, I thought I'd give you all a break from my voice and instead write a quick piece as the sound track. And, it made sense to use the stuff being shown in the video.



Enjoy.

The Wishlist

I don't think I've posted a "wishlist" yet. I know I've mentioned modules that were "in the pipe" for purchase, but that isn't quite the same thing...so here' goes:

1) Livewire Audio Frequency Generator (AFG!...is it here yet?! Is it here?!)
2) Plan B Model 9 Mixer/Atten. <- this is a rad module...simple and effective and multipurpose. And cheap!
3) The Harvestman 1973 Tyme Sefari <- I've been excited about this one for a while, but now that it's getting farther along, I can't wait. I might be more anxious to get this than the AFG.
4) Livewire Chaos Computer <- who knows when this thing will ship...but when it does, I want it.
5) Plan B Model 14 Voltage Processor <- So much more than just a mixer, this thing is a full on voltage tweaker; a must have if you have many modulation sources.
6) The Harvestman 1986 Zorlon Canon <- Another Harvestman that I'm getting more excited about as it nears shipping. The pitched noise sounds like it will be very cool, but I'm fantasizing about using the various gates to drive the Chaos Computer
7) Plan B Model 21 Milton Grande <- An evasive beast like the Chaos Computer, but this is the only sequencer that I've seen that really makes me want to get a sequencer. Once it's released and cash is plentiful, it will be mine.

Filters
I'll list the filters separate because I like having several different filters to choose from, but I don't want more filters as bad as some of the above modules. Maybe that's a good testament to how pleased I am with the Livewire Frequensteiner. ;)
1) Plan B Model 11 Evil Twin <- I love bandpass filters, but I tend to like to get filters which have more than one mode. Based on the sound demos though, this bad boy is the exception.
2) The Harvestman 1982 Polivoks VCF <- A fresh off the assembly line release and it's a brilliant idea; and it's a dead-on reproduction, even using Russian ICs and not US counterparts. It was also developed with the help of the Polivok's original designer. Based on what I've heard of the Polivoks, this thing is mean as hell. It also has simultaneous Lowpass and Bandpass outputs. Actually...this guy will probably bump the Model 11 out of the number one spot...audio demos will be final judge.
3) Cwejman DMF-2 <- If my thirst for filters isn't quenched by both the Harvestman and the Model 11 (and the Metasonix TM-6 and the Frostwave Resonator) then I will have to pick this guy up. I've been told that the Cwejman's don't have the character that I usually go for in a filter, but a "matched" stereo set would be a little too much to pass up...I love stereo filtering.

Well, that's the list. For now anyway. I only hope the bank account can survive it all.

Livewire Dual Bissell Generator Demo

As promised, it's a two for one weekend ;) Here is the video demo of the Livewire Dual Bissell Generator. A simple module, but one of my favorite "tweaking" ones.



Enjoy.

Plan B Model 10 Demo

Man, I was really off my game today. Tripping over my own words and loosing my train of thought mid sentence. Thank god for video editing. I almost thought of keeping a gag reel, but it takes up so much HDD space.

With that said, I proudly present the Plan B Model 10 video demo.



Enjoy.

Controller Quest

So in the process of mulling over this idea of making a custom Eurorack case, I finally decided that I do want to keep one of the Doepfer suitcases with a select few modules as a "performance" system; everything else would go into the custom made case. Hell, I might not even make the custom case and just get that Plan B case that was announced a while back...either way, I'm keeping one Doepfer suitcase as the "performance" system.

So that got me thinking about a controller for it. I don't want to have to use the Doepfer A-190 MIDI to CV converter as that will take up valuable space. I'd also like to have a unique (and better) controller than a shitty little MIDI controller. It's also a perfect opportunity for me to build something myself.

So my first thought was something with a joystick. I had wanted to get one of the Doepfer A-174 Joystick modules, but it always seemed like it would be taking up valuable space. Well, it turns out you can get the bare joysticks from Doepfer, and rigging them up as 0-5v+ attenuators seems relatively simple. Apparently they also come spring loaded (so the stick is always in the center). You can easily tear the springs out and make them free floating as well. Ripping the springs out is irreversible, however, so I thought of getting two joysticks, ripping the springs out of one, and adding a couple of buttons for triggers. Maybe lay it out similar to an old arcade game; I could probably even find the same style buttons. Perfect, this is simple, unique, and in theory, easy for me to put together.

But...it got me to thinking that, at some point, I will undoubtedly need to play something at standard pitches. So I revamped my design...keep the two joysticks, add a 2 octave keyboard, and maybe keep the trigger buttons if necessary (I could always use a keyboard key to trigger). Probably even add mults, and possibly even VCAs directly on the controller rather than take up more of that valuable space in the suitcase.

Well, I can't really find a definitive schematic or anything for taking a regular keyboard (like a fatar replacement, or even ripping the one out of my cheapo m-audio oxygen 8) and converting that to CV.

Does anyone have any leads on making your own CV keyboard? I spent a while googling around, and aside from this item on musicfromouterspace (which might not even be the right thing) I can't find anything.

PlayThing-amagoop

The comments (mainly Zerosum's) on the last Thingamagoop post got me thinking about demoing one application of the Thingamagoop. I was initially thinking of video ideas, but as I was playing around I got to jamming with it and it was too fun not to capture.

There is some modular processing applied:
The Thingamagoop (Ghost of Robot TB1X model, although that doesn't really matter) was plugged into the Doepfer A-119 Envelope Follower into the Ext. In of the Dalek Modulator. Ring Out of the Dalek into the Frequensteiner in bandpass mode, through the Doepfer VCA and then finally into the Moog MF-104 delay. There's some slight slow modulation of the Frequensteiner by the Vulcan Modulator and a touch of filter FM from the Plan B Model 15, the amount of which is being randomly controlled by the Dual Cyclotron.

Where the trick comes in is that I have the Threshold on the Envelope Follower set so that when I have my finger over the Thingamagoop's nose (blocking it's photocell), there is no gate output (and therefore no output from the Thingamagoop+modular). So I'm able to mute the sound just by putting my finger over the photocell.

Now, the modular processing imparts only a little bit of character; 90% of what you hear is the Thingamagoop and me flipping it's switches and playing with the LFO speed. It's pretty much impossible to pick out exactly when the FM of the Frequensteiner happens and the Ring Modulation is not that aggressive. I could have easily just run the Thingamagoop into the delay, but the modular added a nice character.

The left most switch on the Thingamagoop selects the "gate mode". Up is a square wave gate, controlled by the LFO speed. Down is no gate at all. It's pretty easy to hear when I switch back and forth. The right most switch is the pitch range. Down is low range, and up is high. You can hear me switch this a few times, in particular there are a few times where I simultaneously switch the gating off and the pitch to the high range...moving your finger over the photocell in this configuration leads to some really cool modulated tibres (which you'll hear). Adjusting the proximity of the "LEDicle" to the photocell of course also changes the pitch and the amount of modulation; I'm moving that back in forth in front of the photocell as well.
I'm able to do this all with the Thingamagoop cradled in both hands...my left thumb over the photocell, right hand fingers moving the LEDicle and switches and my right palm, and sometimes fingers, moving the LFO knob.

All in all, it's really fun to perform and improve with like this! :D

A simple Machinedrum pattern was used for some rhythm (no modular involvement there).



Enjoy, and please comment.

Latest poll...the winner is...

The Plan B Model 10 Poly EG!

Unfortunately, because I have family visiting this weekend, I won't have time to make a video.

However, because the Livewire Dual Bissell was leading the poll in the beginning and finished in a close second, I will do two videos next weekend! One of the Model 10 and one of the Dual Bissell.

So look forward to those for next weekend.

The Ghost of Robot TB1X

I already had one Thingamagoop, but when I saw the special Halloween editions, I couldn't help myself.

Not only do I now have a special edition Thingamagoop, but I now have a different sounding one. Yes, they sound different and compliment each other quite nicely. I've had a lot of fun so far making each one self modulate the other.

I'll probably draw the line at 2...unless more special editions come along. I'm a bit of a sucker for special editions.

Plan B Model 15 Arrives

The Model 15 Arrives!!! My first oscillator that can track 1v/Oct. Color me ecstatic.

First off, let me say how bad ass Analogue Haven is. Shawn and Chuck and everyone there are the most incredible and nicest guys. I have always had a warm fuzzy feeling inside after giving them money; and it wasn't just because that meant gear was coming my way. If you are not currently giving them money, you should be. Shawn, you are the man!

Ok, so I've only played with it for a few hours last night, so the following is early impressions.

PWM. I see what people are griping about now. The "usable" pulse width range on the knob is pretty small. It's like from 10 - 2 o'clock on the knob, any further on the knob and the sound cuts out, presumably from the pulse being so small. HOWEVER, I completely see why Peter kept this feature. The sound that it makes as the pulse goes from really thin to kate moss thin sounds REALLY cool! It reminds me a bit of some of the sounds that Metasonix modules can make with the right knob settings. I think this feature of the Model 15 is very cool and really makes it stand out of the crowd. It's not your standard PWM, and I really like that. Personally, it would be nicer if it was spread out on the range of the knob a little more, like say 8 - 4 oclock. I don't mind the "dead" spots, just wish they were smaller.

Sync. I particularly like this Sync sound. I know people have complained it's not hard sync, but it has a unique character that is a nice timbral alternative. I have similar feeling towards it as I do the unique PWM; it's not the "standard" sound, but I like it. If you need the "standard" sound, get another VCO and now you have double the possibilities. Or for those who need to have a module that does everything; the Model 15A Expander sounds like it will clear up people's grips with PWM and Sync.

Waveforms. Holy waveshaping batman, these waveforms sound awesome! Granted, I don't have a lot of experience with the various available modular format oscillators, but I have played a lot of both analog and digital synths and I must say that this has the coolest sounding triangle wave I've ever heard. Normally, I hate triangle waves. To me they always sounded overly dull, almost as if something was not working correctly. It was like the inbred cousin of the sine and saw waves. In fact, I only listened to the triangle wave in this case because I accidentally plugged it in when I wanted to hear the sawtooth! Lucky me! Maybe the reason it has such a nice triangle is because it's the core waveform for the VCO. I don't know for sure, I just know I like it!
The sine wave is also incredible. It's very clean and loud, with the slightest touch of character. The sawtooth is still my favorite though. It's very "woody" and "organic" sounding. It pairs up perfectly with the Model 13 low pass gates for beautiful pluck sounds.

Bipolar Attenuators. I love bipolar attenuators. Love them. The only gripe I have about them is that very few modules (none actually to my knowledge) have knobs with detents at 0. This makes it very hard to actually have full attenuation (aka "0"), it's always a little positive or a little negative. This is especially true on the Model 15's Freq CV inputs because they are so sensitive. It's pretty difficult to actually have a CV patched in and have the knob set to 0; not without extremely gentle tweaking. You're not going to be able to turn it up during a performance and get it back to where it was very easily. This isn't really a problem with the Model 15 itself per se, more of a general problem with bipolar attenuators with non-detented knobs. And furthermore, maybe it's just me who gets a little bugged by this.

Morph Output. Man this is cool! I really dig the Sine - Saw morph, it's like another flavor of a PWM sound, but more unique sounding. Blending this output with the sawtooth outputs leads to some cool timbres; likewise doing Sine - Square and combining that with the square wave out. Audio rate modulation enhances this. Use of an envelop makes for a very cool "evolving sound".

Overall, this gets a glowing review from me. 2 thumbs up, if I had a third hand, I have that thumb up too. :D

I do plan on making a video demo, however, I want to spend more time with the module so that I really know it well before doing the demo. I'll also see about getting a loaner 15A Expander so that can be included in the demo since I bet a lot of people are going to want to see that as well.